UV DTF Cup Wrap Application Instructions

UV DTF Cup Wraps provide vibrant, durable designs for customizing cups, tumblers, and mugs. Proper preparation of the transfer and the surface is key to achieving a professional and long-lasting result. Follow these instructions step-by-step for flawless application.

---

What You’ll Need

• UV DTF Cup Wrap
• Cup or tumbler (smooth, clean surface)
• Lint-free cloth or rubbing alcohol
• Heat-resistant tape (optional)
• Squeegee or credit card
• Stable, flat work surface

---

Step 1: Prepare the Surface

1. Clean Thoroughly:
   Use a lint-free cloth and rubbing alcohol to clean the cup or tumbler. This removes any dust, grease, or oils that can interfere with adhesion.

2. Dry Completely:
   Allow the surface to air dry completely before proceeding. Any moisture can weaken the bond between the transfer and the surface.

---

Step 2: Prepare the Transfer

Prepping the transfer is crucial for flawless application. Follow these steps carefully:

1. Smooth Before Peeling:
   Use a squeegee, credit card, or similar tool to firmly smooth the transfer on the clear carrier sheet before peeling. This step ensures the design is fully adhered to the carrier sheet, eliminating air pockets and ensuring even application.

2. Peel the Backing Carefully:
   Slowly peel the white backing sheet away from the clear carrier sheet, ensuring the design stays attached to the clear sheet.

3. Avoid Touching the Adhesive Side:
   Handle the transfer carefully to keep the adhesive clean and sticky, ensuring a strong bond during application.

---

Step 3: Position the Wrap

1. Align and Wrap:
   Place the adhesive side of the wrap onto the cup or tumbler, starting from one edge. Align the design carefully to ensure it is straight and even.

2. Secure with Tape (Optional):
   For large or detailed designs, use heat-resistant tape to hold the wrap in place while smoothing it down.

---

Step 4: Apply the Wrap

1. Press and Smooth:
   Use a squeegee or credit card to press the wrap firmly onto the surface. Start at the center and work outward in smooth motions to eliminate air bubbles and wrinkles.

2. Maintain Even Pressure:
   Apply consistent, firm pressure across the entire wrap to ensure uniform adhesion and prevent cracking.

---

Step 5: Remove the Clear Carrier Sheet

1. Peel Slowly:
   Once the wrap is securely adhered, carefully peel the clear carrier sheet away at a 45-degree angle.

2. Repress if Needed:
   If any part of the design lifts, lay it back down and press it again with the squeegee before peeling further.

---

Step 6: Curing Time

1. Let it Set:
   Allow the wrap to cure for 24-48 hours to ensure the adhesive forms a strong, permanent bond.

2. Avoid Washing or Handling:
   Do not wash or heavily handle the cup during the curing period to protect the design.

---

Pro Tips for Success

• Prepping the Transfer is Key: Smoothing the transfer onto the carrier sheet before peeling ensures even application and eliminates bubbles.
• Work on a Stable Surface: Ensure the cup or tumbler is placed on a secure, flat surface to avoid shifting during application.
• Use Heat-Resistant Tape for Larger Wraps: Tape helps hold the design in place while you press and smooth.
• Inspect for Air Bubbles: Press out air bubbles before peeling the carrier sheet for a smooth, professional finish.
• Handwash for Longevity: After curing, handwash the cup with mild soap to maintain the wrap’s vibrant appearance.

---

By following these instructions, you’ll achieve a flawless, long-lasting UV DTF wrap for your custom cups and tumblers. For questions or additional help, contact us at:
📧 info@dtftransfersofvirginia.com